Earthworks Audio - DK3L - 3 Mic Drum Kit

 "DK3L"

Smart design. Sonic brilliance. Built tough. 

Bring It All Together

A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.

 

Punch Through the Mix

With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you’re after.

 

Isolation Like Never Before

Massive rear rejection and a polar pattern that’s consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.

 

Handcrafted, Machined, & Assembled in the USA

---

 Specifications

 

SR25

Frequency Response	20Hz – 25kHz
Polar Pattern	Cardioid
Sensitivity	10mV/Pa (-40dBV/Pa)
Power Requirements	24-48V Phantom, 10mA
Max Acoustic Input	145dB SPL
Output	XLR (pin 2+)
Output Impedance	65Ω balanced (between pins 2 & 3)
Min Output Load	600Ω between pins 2 & 3
Noise	20dB SPL equivalent (A weighted)
Dimensions (L x D)	165mm x 22mm (6.5 x .860 inches)
Weight	.35 lb. (160g)

---

SR20LS

Frequency Response	20Hz – 20kHz
Polar Pattern	Cardioid
Sensitivity	3mV/Pa (-50dBV/Pa)
Power Requirements	24-48V Phantom, 10mA
Max Acoustic Input	150dB SPL
Signal-to-Noise Ratio	74dB A-weighted
Output	XLR (pin 2+)
Output Impedance	200Ω balanced (between pins 2 & 3)
Min Output Load	1000Ω between pins 2 & 3
Noise	20dB SPL equivalent (A weighted)
Dimensions (L x D)	192mm x 22mm (7.57 x .860 inches)
Weight	.36 lb. (164g)

---

 Your Purchase Includes

- 2 x SR25 Cardioid Microphones (Overheads)
- 1 x SR20LS (Kickdrum)
-3 x MC1 Mic Clips
- 3 x SRW3 Foam Windscreens (for SR25s & SR20LS)

---

Register your product here

https://earthworksaudio.com/support/product-registration/

---