Earthworks Audio - DK7 - Drum Mic Kit

 "DK7"

Smart design. Sonic brilliance. Built tough.

 Seven Alone. One Together. 
On their own, each microphone in the Earthworks DK7 kit is best in its class. When combined, they capture the full complexity of your drumkit.

Your Drums. Your Sound.

 The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.

 

Lightning Fast

 Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.

 

Bring It All Together

A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.

 

Punch Through the Mix

With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you’re after.

 

Isolation Like Never Before

Massive rear rejection and a polar pattern that’s consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.

 

Handcrafted, Machined, & Assembled in the USA

---

 Specifications

 

DM20

Frequency Response	20Hz – 20kHz
Polar Pattern	Cardioid
Sensitivity	8mV/Pa (-42dBV/Pa)
Power Requirements	24-48V Phantom, 10mA
Max Acoustic Input	150dB SPL
Signal-to-Noise Ratio	74dB A-weighted
Output	XLR (pin 2+)
Output Impedance	200Ω balanced (between pins 2 & 3)
Min Output Load	1000Ω between pins 2 & 3
Noise	20dB SPL equivalent (A weighted)
Dimensions (L x D)	282mm x 22mm (11.12 x .860 inches)
Gooseneck Length	121mm (4.75 inches)
Weight	.55 lb. (.25kg)

---

SR25

Frequency Response	20Hz – 25kHz
Polar Pattern	Cardioid
Sensitivity	10mV/Pa (-40dBV/Pa)
Power Requirements	24-48V Phantom, 10mA
Max Acoustic Input	145dB SPL
Output	XLR (pin 2+)
Output Impedance	65Ω balanced (between pins 2 & 3)
Min Output Load	600Ω between pins 2 & 3
Noise	20dB SPL equivalent (A weighted)
Dimensions (L x D)	165mm x 22mm (6.5 x .860 inches)
Weight	.35 lb. (160g)

---

SR20LS

Frequency Response	20Hz – 20kHz
Polar Pattern	Cardioid
Sensitivity	3mV/Pa (-50dBV/Pa)
Power Requirements	24-48V Phantom, 10mA
Max Acoustic Input	150dB SPL
Signal-to-Noise Ratio	74dB A-weighted
Output	XLR (pin 2+)
Output Impedance	200Ω balanced (between pins 2 & 3)
Min Output Load	1000Ω between pins 2 & 3
Noise	20dB SPL equivalent (A weighted)
Dimensions (L x D)	192mm x 22mm (7.57 x .860 inches)
Weight	.36 lb. (164g)

---

 Your Purchase Includes

- 2 x SR25 Cardioid Microphones (Overheads)
- 4 x DM20 DrumMic™ (Toms & Snare)
- 1 x SR20LS (Kickdrum)

- 4 x RM1 RimMount™ (for DM20s)
- 3 x SRW3 Foam Windscreens (for SR25s & SR20LS)
- 4 x PW1 Windscreens (for DM20s)

- 1 High Impact Carrying Case with custom foam insert.

---

Register your product here

https://earthworksaudio.com/support/product-registration/

---