Earthworks Audio - FW430 - Integrated Cardioid Microphone, Boom & Stand for Instrument Miking - FlexWand

" FW430 "

Models

1. FW430 4′ 7″ Foot Cardioid FlexWand with cast-iron base

2. FW430mp 4′ 7″ Foot Cardioid FlexWand with cast-iron base – Matched Pair

3. FW430/HC 4′ 7″ Foot Hypercardioid FlexWand with cast-iron base

4. FW430/HCmp 4′ 7″ Foot Hypercardioid FlexWand with cast-iron base – Matched Pair

5. FW430TPB 4′ 7″ Foot Cardioid FlexWand with tripod base

6. FW430TPBmp 4′ 7″ Foot Cardioid FlexWand with tripod base – Matched Pair

7. FW430/HC-TPB 4′ 7″ Foot Hypercardioid FlexWand with tripod base

8. FW430/HC-TPBmp 4′ 7″ Foot Hypercardioid FlexWand with tripod base –Matched Pair

 Integrated miking system with 30kHz cardioid microphone, low profile microphone stand and boom

 - Wide coverage area

 - Near-perfect polar pattern with high rejection of sounds from the rear of the microphone

 - Handles up to 145dB SPL without distortion

Options

- The FlexWand™ microphones have cast iron or tripod base options.

- Available in cardioid or hypercardioid.

- Matched pairs available.

Features

- Uniform frequency response on or off axis

- Frequency response up to 30kHz

- Large flex section near the center of the stand that couples the stand and the wand

- Mini-gooseneck between the end of the wand and the microphone head

- Substantial improvement in gain before feedback

- They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone

- The near perfect polar response of the FlexWand™ allows the use of fewer microphones with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone

- The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over

- Handcrafted, Machined, & Assembled in the USA.

Specification

Frequency Response: 20Hz to 30kHz

Polar Pattern: Cardioid

Sensitivity: 10mV/Pa (-40dBV/Pa)

Power Requirements: 24 – 48V Phantom, 10mA

Max Acoustic Input: 145dB SPL

Output: XLR (pin 2+)

Output Impedance: 65Ω balanced (between pins 2 & 3)

Min Output Load: 600Ω between pins 2 & 3

Noise: 16dB SPL equivalent (A weighted)

Positioning Range: From 10 inches to 4.7 feet above floor level

Dimensions: Stand 4’7″ (1.39m); Base 12″ (30.5cm) in diameter, 1.1″ (2.7cm) high

Color: Stand, flex & wand – black, base – dark gray

Weight: Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)

Charts

Applications

- Acoustic Guitar

- Bass Amp

- Brass/Woodwinds

- Drums/Percussion

- Guitar Amp

- Live Vocals

- Recording

- Theater

Included Accessories

(1) x PW1 Foam Windscreen